o1012 tkim/81006ea msim/62504 tsim tb-00000308/83100 ts(koto) /21000 ts(koto) ta-2706 no.6405-1/7 http://onsemi.com semiconductor components industries, llc, 2013 september, 2013 cph3116/CPH3216 bipolar transistor (?) 50v, (?) 1a, low v ce ( sat ) , ( pnp ) npn single cph3 stresses exceeding maximum ratings may damage the device. maximum ratings are stress ratings only. functional operation above t he recommended operating conditions is not implied. extended exposure to stresses above the recommended operating conditions may affect device reliabili ty. applications ? relay drivers, lamp drivers, motor drivers, ash features ? adoption of mbit processes ? large current capacity ? low collector-to-emitter saturation voltage ? high-speed switching ? ultrasmall package facilitates miniaturization in end products (mounting height : 0.9mm) ? high allowable power dissipation speci cations ( ): cph3116 absolute maximum ratings at ta=25c parameter symbol conditions ratings unit collector-to-base voltage v cbo (--50)80 v collector-to-emitter voltage v ces (--50)80 v emitter-to-base voltage v ceo (--)50 v emitter-to-base voltage v ebo (--)5 v collector current i c (--)1.0 a collector current (pulse) i cp (--)3 a base current i b (--)200 ma collector dissipation p c when mounted on ceramic substrate (600mm 2 0.8mm) 0.9 w junction temperature tj 150 c storage temperature tstg --55 to +150 c package dimensions unit : mm (typ) 7015a-003 ordering number : en6405f product & package information ? package : cph3 ? jeita, jedec : sc-59, to-236, sot-23 ? minimum packing quantity : 3,000 pcs./reel packing type: tl marking electrical connection tl 1 : base 2 : emitter 3 : collecto r cph3 2.9 0.05 0.4 2.8 1.6 0.2 0.6 0.6 0.9 0.2 0.15 2 1 3 0.95 3 2 1 3 2 1 CPH3216 cph3116 ar lot no. cr lot no. CPH3216 cph3116 cph3116-tl-e CPH3216-tl-e
cph3116/CPH3216 no.6405-2/7 electrical characteristics at ta=25c parameter symbol conditions ratings unit min typ max collector cutoff current i cbo v cb =(--)40v, i e =0a (--)0.1 a emitter cutoff current i ebo v eb =(--)4v, i c =0a (--)0.1 a dc current gain h fe v ce =(--)2v, i c =(--)100ma 200 560 gain-bandwidth product f t v ce =(--)10v, i c =(--)300ma 420 mhz output capacitance cob v cb =(--)10v, f=1mhz (9)6 pf collector-to-emitter saturation voltage v ce (sat)1 i c =(--)500ma, i b =(--)10ma (--280)130 (--430)190 mv collector-to-emitter saturation voltage v ce (sat)2 i c =(--)300ma, i b =(--)6ma (--145)90 (--220)135 mv base-to-emitter saturation voltage v be (sat) i c =(--)500ma, i b =(--)10ma (--)0.81 (--)1.2 v collector-to-base breakdown voltage v (br)cbo i c =(--)10 a, i e =0a (--50)80 v collector-to-emitter breakdown voltage v (br)ces i c =(--)100 a,r be =0 (--50)80 v collector-to-emitter breakdown voltage v (br)ceo i c =(--)1ma, r be = (--)50 v emitter-to-base breakdown voltage v (br)ebo i e =(--)10 a, i c =0a (--)5 v turn-on time t on see speci ed test circuit. 35 ns storage time t stg (170)330 ns fall time t f (30)40 ns switching time test circuit ordering information device package shipping memo cph3116-tl-e cph3 3,000pcs./reel pb free CPH3216-tl-e cph3 3,000pcs./reel pb free 50ma --1000 --800 --600 --400 --200 0 i c -- v ce 0 --0.2 --0.4 --0.6 --0.8 --1.0 i b =0ma collector-to-emitter voltage, v ce -- v collector current, i c -- a 1000 800 600 400 200 0 i c -- v ce 0 0.2 0.4 0.6 0.8 1.0 collector-to-emitter voltage, v ce -- v collector current, i c -- a cph3116 CPH3216 --4ma --10ma --8ma --6ma --30ma --20ma --40ma --50ma 10ma 8ma 6ma 4ma 2ma i b =0ma 30ma 20ma 40ma --2ma it01643 it01644 + + 50 input outpu t v r r b r l v cc =25v 100 f 470 f v be = --5v pw=20 s i b1 i b2 dc 1% (for pnp, the polarity is reversed.) i c =20i b1 = --20i b2 =500ma
cph3116/CPH3216 no.6405-3/7 collector-to-base voltage, v cb -- v cob -- v cb output capacitance, cob -- pf 2 3 5 7 10 2 3 5 7 100 7 --0.1 23 5 57 --1.0 23 57 --10 23 57 --100 cph3116 f=1mhz collector-to-base voltage, v cb -- v cob -- v cb output capacitance, cob -- pf 7 0.1 23 5 57 1.0 23 57 10 23 57 100 2 3 5 7 10 2 3 5 7 100 CPH3216 f=1mhz it01651 it01652 it01647 it01649 it01648 it01650 2 10 3 5 7 2 3 5 7 100 1000 h fe -- i c dc current gain, h fe collector current, i c -- a ta=75 c --25 c cph3116 v ce = --2v 25 c h fe -- i c dc current gain, h fe collector current, i c -- a ta=75 c --25 c CPH3216 v ce =2v 25 c 2 3 5 7 100 2 3 2 3 5 5 7 1000 f t -- i c gain-bandwidth product, f t -- mhz collector current, i c -- a 2 3 2 3 5 5 7 1000 2 3 5 7 100 f t -- i c gain-bandwidth product, f t -- mhz collector current, i c -- a 23 57 23 57 23 --0.01 --0.1 --1.0 23 23 3 57 2 57 --0.01 --0.1 --1.0 23 57 0.1 0.01 23 3 57 1.0 2 CPH3216 v ce =10v 2 3 5 7 100 2 3 5 7 1000 10 23 57 0.1 23 57 1.0 23 0.01 cph3116 v ce = --10v --1.0 --0.9 --0.8 --0.7 --0.6 --0.4 --0.3 --0.2 --0.1 0 --0.5 i c -- v be collector current, i c -- a 25 c --25 c ta=75 c base-to-emitter voltage, v be -- v cph3116 v ce = --2v i c -- v be collector current, i c -- a base-to-emitter voltage, v be -- v 25 c --25 c ta=75 c CPH3216 v ce =2v 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 0 0.2 0.4 0.6 0.8 1.0 1.2 it01645 it01646 0 --0.2 --0.4 --0.6 --0.8 --1.0 --1.2
cph3116/CPH3216 no.6405-4/7 a s o collector-to-emitter voltage, v ce -- v collector current, i c -- a 100ms dc operation 100 s 500 s 10ms 1.4 1.2 1.0 0.9 0.8 0.6 0.4 0.2 0 0 20 40 60 80 100 120 140 160 p c -- ta collector dissipation, p c -- w ambient temperature, ta -- c 1ms i cp =3a i c =1a 2 3 5 7 2 3 5 7 2 3 5 7 10 1.0 0.1 0.01 23 57 23 57 23 57 0.1 1.0 10 100 it01659 it01660 cph3116 / CPH3216 cph3116 / CPH3216 v ce (sat) -- i c collector current, i c -- a --25 c cph3116 i c / i b =50 ta=75 c v ce (sat) -- i c collector current, i c -- a CPH3216 i c / i b =50 --25 c ta=75 c v be (sat) -- i c collector current, i c -- a cph3116 i c / i b =50 ta= --25 c 75 c 25 c v be (sat) -- i c collector current, i c -- a CPH3216 i c / i b =50 ta= --25 c 75 c 25 c 2 3 5 7 2 3 5 7 --0.01 --0.01 --0.1 23 57 --1.0 2 357 --0.1 --1.0 it01655 it01657 it01656 it01658 7 --10 5 3 2 7 --1.0 --0.1 --0.01 23 57 --0.1 23 57 --1.0 5 3 2 7 5 3 2 10 7 5 3 2 0.1 0.1 0.01 23 57 1.0 23 57 1.0 1.0 7 5 3 2 0.1 0.01 0.01 23 57 0.1 23 57 1.0 7 5 3 2 25 c 25 c v ce (sat) -- i c collector current, i c -- a --25 c ta=75 c cph3116 i c / i b =20 v ce (sat) -- i c collector current, i c -- a CPH3216 i c / i b =20 --25 c ta=75 c it01653 it01654 7 5 3 2 --1.0 --0.1 7 5 3 2 23 57 --0.1 --0.01 23 57 --1.0 --0.01 1.0 7 5 3 2 7 5 3 2 0.1 0.01 0.01 23 57 0.1 1.0 23 57 25 c 25 c collector-to-emitter saturation voltage, v ce (sat) -- v collector-to-emitter saturation voltage, v ce (sat) -- v collector-to-emitter saturation voltage, v ce (sat) -- v collector-to-emitter saturation voltage, v ce (sat) -- v base-to-emitter saturation voltage, v be (sat) -- v base-to-emitter saturation voltage, v be (sat) -- v ta=25 c single pulse mounted on a ceramic board (600mm 2 0.8mm) for pnp, minus sign is omitted. mounted on a ceramic board (600mm 2 0.8mm)
cph3116/CPH3216 no.6405-5/7 embossed taping speci cation cph3116-tl-e, CPH3216-tl-e
cph3116/CPH3216 no.6405-6/7 outline drawing land pattern example cph3116-tl-e, CPH3216-tl-e mass (g) unit 0.013 * for reference mm unit: mm 0.6 2.4 0.95 0.95 1.4
cph3116/CPH3216 ps no.6405-7/7 on semiconductor and the on logo are registered trademarks of semiconductor components industries, llc (scillc). scillc owns th e rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. a listing of scillc?s product/patent covera ge may be accessed at www.onsemi.com/site/pdf/patent-marking.pdf. scillc reserves the right to make changes without further notice to any products herein. scillc makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does scillc ass ume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation sp ecial, consequential or incidental damages. ?typical? parameters which may be provided in scillc data sheets and/or specifications can and do vary in different ap plications and actual performance may vary over time. all operating parameters, including ?typicals? must be validated for each customer application by customer?s technical experts. scillc does not convey any license under its patent rights nor the rights of others. scillc products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life , or for any other application in which the failure of the scillc product could create a situation where personal injury or death may occur. should buyer purchas e or use scillc products for any such unintended or unauthorized application, buyer shall indemnify and hold scillc and its officers, employees, subsidiarie s, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that scillc was negligent regarding the d esign or manufacture of the part. scillc is an equal opportunity/affirmative action employer. this literature is subject to all applicable copyright laws a nd is not for resale in any manner.
|
